About Anti-Bedsore Alternating Pressure Mattress with Compressor

Air cell mattress divided into two independent air circuits and compressor with airflow regulation. With flaps on the tops to attach to the mattress. Compressor weight: 1.10kg; Mattress weight: 2.3kg; Number of cells: 130 Power supply: ~ 220V 50/60Hz Power cable: 2.20m Air release: 6/7LPM Cycle time: 6 min. Noise: 32-34 dB

Specifications

Dimensions: Mattress dim. 200 x 90 x 7.6 cm; Compressor dim. 27 x 13 x 10.5 cm

Color: Beige mattress and white and blue compressor.

Profile and Instructions for Use: Instructions for Use:
1. Open the package;
2. The mattress comes rolled up – remove it from the box and unroll the mattress over the bed;
3. Fold and place the edges of the mattress between the bed and the mattress to secure it and prevent involuntary movement;
4. Remove and unpack the compressor and then place it at the top of the bed’s feet using the hooks on the back of the compressor, or alternatively place it on a flat surface;
5. Check that the ON/OFF switch on the compressor is in the OFF position;
6. Connect the tubes to the lower end of the mattress and to the compressor nozzles;
7. Turn the knob to the right, bringing the narrowest part towards “+”. In this way, the compressor will provide maximum pressure;
9. Plug the compressor’s plug into the 220V power outlet;
10. Turn on the compressor using the on/off switch and wait 25 minutes for the compressor to fully inflate the mattress.

Item weight: 3,600 Kg